Energy Metering Solutions
-- Steady & Reliable Manufacturer --
Energy Metering Solutions
Energy metering systems demand relays that combine long-term reliability, low standby power, and stable contact performance across wide temperature ranges. Magnetic latching relays are the preferred switching element in smart meters and energy measurement devices because they hold their contact state without continuous coil power. A single 50–100 ms pulse at 0.5W to 1.5W is sufficient to change state, after which the relay consumes zero power in steady state. This makes them ideal for battery-assisted meters, prepaid meters, and IoT-connected metering nodes where power budgets are tightly constrained. Contact ratings of 5A to 30A cover AC and DC load switching, with mechanical life exceeding 10,000,000 operations to support the multi-year service life of metering installations.
Huajin Technology — Relay Manufacturer for Energy Metering
Huajin Technology Jiaxing Co., Ltd. was established in May 2021 and is located at 707 Yanyu Road, Yucheng Town, Haiyan County, Jiaxing City, Zhejiang Province. It is a high-tech enterprise specializing in the research and development, production, and sales of relays. The registered capital of the company is 10 million yuan, covering an area of 8,000 square meters, with more than 120 employees. The annual production capacity of magnetic latching relays is over 10 million, of which exports account for about 30%. The company has obtained ISO9001-2015 quality management system certification, and its relays have passed CCC certification, State Grid certification, TUV certification, etc. It also holds multiple technical patents. Main products include motor relays and single-phase, two-phase, and three-phase magnetic latching relays, with a wide variety of types to meet various customized solutions for energy metering customers.
Specifications for Metering Applications
| Parameter | Specification |
|---|---|
| Contact Configuration | 1A, 1C, 2A, 2C |
| Contact Material | AgSnO2, AgNi, Au-plated (signal) |
| Contact Current Rating | 5A – 30A |
| Coil Voltage Options | 3V, 5V, 12V, 24V, 48V DC |
| Coil Power (Pulse) | 0.5W – 1.5W (50–100 ms pulse) |
| Steady State Power | 0 W (latching holds state) |
| Pick-up Voltage | ≥ 70% of nominal coil voltage |
| Drop-out Voltage | ≥ 30% of nominal coil voltage |
| Electrical Endurance | ≥ 50,000 operations at rated load |
| Mechanical Endurance | ≥ 10,000,000 operations |
| Operating Temperature | -40°C to +85°C |
| Safety Approvals | TUV, CCC, CE, State Grid |
Metering Applications
- Single-phase and three-phase smart electricity meters
- Prepaid and AMI/AMR metering systems
- Energy measurement devices with battery backup
- IoT-connected metering nodes and data concentrators
- State Grid certified metering installations
Advantages for Metering
- Zero standby power consumption in steady state
- Wide operating temperature range (-40°C to +85°C)
- Low pick-up voltage for weak driver compatibility
- Mechanical life ≥ 10,000,000 operations
- State Grid, TUV, and CCC certified for metering use
Why are magnetic latching relays used in energy meters?
Energy meters must operate reliably for years on limited power budgets. Magnetic latching relays hold their contact state with a permanent magnet after a short switching pulse, so no coil current flows in steady state. This zero standby consumption is essential for battery-assisted and prepaid meters.
What pulse duration is required for meter relay switching?
A pulse of 50–100 ms at 0.5W to 1.5W is typically sufficient to set or reset the relay. The exact pulse width depends on coil voltage and relay model; Huajin can optimize pulse duration for specific meter driver circuits.
Can these relays be driven directly by meter MCU GPIO pins?
Yes. The low pick-up voltage (≥ 70% of nominal) and short pulse duration make these relays suitable for direct drive from microcontroller GPIO pins or dedicated driver ICs used in metering designs.
Are the relays certified for State Grid metering projects?
Yes. Huajin relays have passed CCC certification, State Grid certification, and TUV certification, and the company holds ISO9001-2015 quality management system certification and multiple technical patents.
Why are magnetic latching relays used in energy meters?
Energy meters must operate reliably for years on limited power budgets. Magnetic latching relays hold their contact state with a permanent magnet after a short switching pulse, so no coil current flows in steady state. This zero standby consumption is essential for battery-assisted and prepaid meters.
What pulse duration is required for meter relay switching?
A pulse of 50–100 ms at 0.5W to 1.5W is typically sufficient to set or reset the relay. The exact pulse width depends on coil voltage and relay model; Huajin can optimize pulse duration for specific meter driver circuits.
Can these relays be driven directly by meter MCU GPIO pins?
Yes. The low pick-up voltage (≥ 70% of nominal) and short pulse duration make these relays suitable for direct drive from microcontroller GPIO pins or dedicated driver ICs used in metering designs.
Are the relays certified for State Grid metering projects?
Yes. Huajin relays have passed CCC certification, State Grid certification, and TUV certification, and the company holds ISO9001-2015 quality management system certification and multiple technical patents.
Material Selection for Metering Relays
- Magnet — High Energy Product (e.g., NdFeB): Provides stable holding force over temperature (-40°C to +85°C), ensuring reliable state retention in outdoor and indoor meter enclosures.
- Coil — High Sensitivity Wire: Enables low power operation with reduced ampere-turns requirement, supporting weak MCU driver signals.
- Contact Material — Silver Tin Oxide (AgSnO2) for power, Gold-plated for signal: AgSnO2 provides arc resistance for load switching; gold plating ensures stable low-level contact resistance for signal and measurement circuits.
- Housing — LCP (Liquid Crystal Polymer) for high temperature: Provides dimensional stability across temperature range and high dielectric strength for metering environments.
Customized Metering Relay Solutions
Huajin Technology offers customization for energy metering relays including pulse duration optimization, coil resistance tuning for specific meter driver circuits, contact material selection, and special housing dimensions for PCB layout constraints in meter designs. With annual capacity of over 10 million magnetic latching relays and about 30% exported, Huajin supplies smart meter manufacturers and energy measurement device OEMs with single-phase, two-phase, and three-phase magnetic latching relays, as well as motor relays, under ISO9001-2015, CCC, State Grid, and TUV certifications.
-
0+
Established in May 2021
-
0%
Annual exports account for about 30%
-
0㎡
The company occupies an area of 8,000 square meters.
Huajin Technology Jiaxing Co., Ltd. was established in May 2021 and is located at 707 Yanyu Road, Yucheng Town, Haiyan County, Jiaxing City, Zhejiang Province. It is a high-tech enterprise specializing in the research and development, production, and sales of relays.The registered capital of the company is 10 million yuan, covering an area of 8000 square meters, with more than 120 employees. The annual production capacity of magnetic latching relays is over 10 million, of which exports account for about 30%. The company has obtained ISO9001-2015 quality management system certification, and its relays have passed CCC certification, State Grid certification, TUV certification, etc. It also holds multiple technical patents. Our main products include motor relays, single-phase, two-phase, and three-phase magnetic latching relays, which have a wide variety of types and can meet various customized solutions for customers.

English
中文简体
русский











