PCB Mount Relays
-- Steady & Reliable Manufacturer --
PCB Mount Relays
PCB mount relays are designed for direct integration onto printed circuit boards, where footprint, pin pitch, and soldering compatibility matter as much as switching performance. Magnetic latching types eliminate coil power in steady state: a 50–100 ms pulse at 0.5W to 1.5W switches the contact, after which a permanent magnet holds position with zero power draw. This removes holding heat from the PCB and reduces the load on onboard DC rails. With contact configurations of 1A, 1C, 2A and 2C, current ratings from 5A to 30A, coil voltages of 3V, 5V, 12V, 24V and 48V DC, and pick-up voltage as low as 70% of nominal, these relays suit both signal-level and power-level board designs. LCP housings provide dimensional stability through the -40°C to +85°C range and high dielectric strength, while mechanical life exceeding 10,000,000 operations supports long service life in board-mounted equipment.
Huajin Technology — PCB Mount Relay Manufacturer
Huajin Technology Jiaxing Co., Ltd. was established in May 2021 and is located at 707 Yanyu Road, Yucheng Town, Haiyan County, Jiaxing City, Zhejiang Province. It is a high-tech enterprise specializing in the research and development, production, and sales of relays. The registered capital of the company is 10 million yuan, covering an area of 8,000 square meters, with more than 120 employees. The annual production capacity of magnetic latching relays is over 10 million, of which exports account for about 30%. The company has obtained ISO9001-2015 quality management system certification, and its relays have passed CCC certification, State Grid certification, TUV certification, etc. It also holds multiple technical patents. Main products include motor relays and single-phase, two-phase, and three-phase magnetic latching relays, with a wide variety of types to meet various customized solutions for PCB mount customers.
Specifications for PCB Mount Applications
| Parameter | Specification |
|---|---|
| Contact Configuration | 1A, 1C, 2A, 2C |
| Contact Material | AgSnO2, AgNi, Au-plated (signal) |
| Contact Current Rating | 5A – 30A |
| Coil Voltage Options | 3V, 5V, 12V, 24V, 48V DC |
| Coil Power (Pulse) | 0.5W – 1.5W (50–100 ms pulse) |
| Steady State Power | 0 W (latching holds state) |
| Pick-up Voltage | ≥ 70% of nominal coil voltage |
| Drop-out Voltage | ≥ 30% of nominal coil voltage |
| Electrical Endurance | ≥ 50,000 operations at rated load |
| Mechanical Endurance | ≥ 10,000,000 operations |
| Operating Temperature | -40°C to +85°C |
| Safety Approvals | TUV, CCC, CE |
PCB Mount Applications
- Control boards and embedded power modules
- Signal routing and load switching on PCBA
- Battery-powered and handheld device boards
- Metering, monitoring and instrumentation boards
- Compact power supplies and driver boards
Advantages for PCB Mount
- Zero holding heat on the PCB and inside the enclosure
- No steady-state coil current on onboard DC rails
- Low pick-up voltage for direct MCU GPIO drive
- LCP housing for reflow-compatible dimensional stability
- Mechanical life ≥ 10,000,000 operations
Why choose latching relays for PCB mounting?
On a PCB, every watt of holding heat raises local temperature and can affect nearby components. Latching relays need power only for the 50–100 ms switching pulse, so they add no steady-state heat and draw no continuous current from onboard DC rails.
Can these relays be driven directly from MCU GPIO pins?
Yes. The low pick-up voltage (≥ 70% of nominal) and short pulse duration make these relays suitable for direct drive from microcontroller GPIO pins or dedicated driver ICs on the board.
Are the housings compatible with reflow soldering?
The LCP (Liquid Crystal Polymer) housing provides dimensional stability and high dielectric strength across the -40°C to +85°C operating range. For specific reflow profiles and pin pitch requirements, Huajin can confirm compatibility and provide customized housing dimensions.
What contact materials are available for board-level designs?
AgSnO2 is used for power-level load switching with arc resistance; gold-plated contacts are available for signal-level switching where stable low-level contact resistance is required.
Why choose latching relays for PCB mounting?
On a PCB, every watt of holding heat raises local temperature and can affect nearby components. Latching relays need power only for the 50–100 ms switching pulse, so they add no steady-state heat and draw no continuous current from onboard DC rails.
Can these relays be driven directly from MCU GPIO pins?
Yes. The low pick-up voltage (≥ 70% of nominal) and short pulse duration make these relays suitable for direct drive from microcontroller GPIO pins or dedicated driver ICs on the board.
Are the housings compatible with reflow soldering?
The LCP (Liquid Crystal Polymer) housing provides dimensional stability and high dielectric strength across the -40°C to +85°C operating range. For specific reflow profiles and pin pitch requirements, Huajin can confirm compatibility and provide customized housing dimensions.
What contact materials are available for board-level designs?
AgSnO2 is used for power-level load switching with arc resistance; gold-plated contacts are available for signal-level switching where stable low-level contact resistance is required.
Material Selection for PCB Mount Relays
- Magnet — High Energy Product (e.g., NdFeB): Provides stable holding force over temperature (-40°C to +85°C), ensuring state retention without coil power on the board.
- Coil — High Sensitivity Wire: Reduces ampere-turns requirement, enabling low-power pulse drive from MCU GPIO or driver ICs.
- Contact Material — Silver Tin Oxide (AgSnO2) for power, Gold-plated for signal: AgSnO2 handles arc and inrush on load circuits; gold plating ensures stable low-level contact resistance for signal and measurement paths.
- Housing — LCP (Liquid Crystal Polymer) for high temperature: Provides dimensional stability for PCB mounting and high dielectric strength across the operating range.
Customized PCB Mount Relay Solutions
Huajin Technology offers customization for PCB mount relays including pin pitch and footprint adjustment for specific board layouts, coil resistance tuning for particular driver circuits, contact material selection for signal or power switching, and housing dimensions for space-constrained PCBA designs. With annual capacity of over 10 million magnetic latching relays and about 30% exported, Huajin supplies board-level equipment manufacturers and embedded module OEMs with single-phase, two-phase, and three-phase magnetic latching relays, as well as motor relays, under ISO9001-2015, CCC, and TUV certifications.
-
0+
Established in May 2021
-
0%
Annual exports account for about 30%
-
0㎡
The company occupies an area of 8,000 square meters.
Huajin Technology Jiaxing Co., Ltd. was established in May 2021 and is located at 707 Yanyu Road, Yucheng Town, Haiyan County, Jiaxing City, Zhejiang Province. It is a high-tech enterprise specializing in the research and development, production, and sales of relays.The registered capital of the company is 10 million yuan, covering an area of 8000 square meters, with more than 120 employees. The annual production capacity of magnetic latching relays is over 10 million, of which exports account for about 30%. The company has obtained ISO9001-2015 quality management system certification, and its relays have passed CCC certification, State Grid certification, TUV certification, etc. It also holds multiple technical patents. Our main products include motor relays, single-phase, two-phase, and three-phase magnetic latching relays, which have a wide variety of types and can meet various customized solutions for customers.

English
中文简体
русский











