+86-188-5739-7300
CHINA MANUFACTURER

Huajin Technology

Established in 2021, we are a high-tech enterprise specializing in the research, development, and production of magnetic latching relays, serving global industrial and commercial partners.

10M+ Annual Capacity
8,000 SqM Facility
120+ Team Members
30% Exported Globally
CCC Certified State Grid TUV Certified ISO9001 10+ Patents
R&D
Quality
Customization

Telecom Infrastructure

-- Steady & Reliable Manufacturer --

Telecom Infrastructure

Telecom infrastructure—base stations, remote radio units, equipment rooms, and outdoor cabinets—operates on limited auxiliary power and must remain reliable across extreme temperatures and unattended sites. Magnetic latching relays are well suited to these conditions because they hold contact state without continuous coil power. A 50–100 ms pulse at 0.5W to 1.5W is enough to switch state, after which the relay draws zero steady-state power, reducing heat inside sealed enclosures and easing the load on DC backup supplies. With contact ratings of 5A to 30A, AgSnO2 contacts for arc resistance, a -40°C to +85°C operating range, and mechanical life exceeding 10,000,000 operations, these relays support power distribution switching, battery backup control, and remote monitoring circuits in telecom equipment.

Huajin Technology — Relay Manufacturer for Telecom Infrastructure

Huajin Technology Jiaxing Co., Ltd. was established in May 2021 and is located at 707 Yanyu Road, Yucheng Town, Haiyan County, Jiaxing City, Zhejiang Province. It is a high-tech enterprise specializing in the research and development, production, and sales of relays. The registered capital of the company is 10 million yuan, covering an area of 8,000 square meters, with more than 120 employees. The annual production capacity of magnetic latching relays is over 10 million, of which exports account for about 30%. The company has obtained ISO9001-2015 quality management system certification, and its relays have passed CCC certification, State Grid certification, TUV certification, etc. It also holds multiple technical patents. Main products include motor relays and single-phase, two-phase, and three-phase magnetic latching relays, with a wide variety of types to meet various customized solutions for telecom infrastructure customers.

Specifications for Telecom Applications

Parameter Specification
Contact Configuration 1A, 1C, 2A, 2C
Contact Material AgSnO2, AgNi, Au-plated (signal)
Contact Current Rating 5A – 30A
Coil Voltage Options 3V, 5V, 12V, 24V, 48V DC
Coil Power (Pulse) 0.5W – 1.5W (50–100 ms pulse)
Steady State Power 0 W (latching holds state)
Pick-up Voltage ≥ 70% of nominal coil voltage
Drop-out Voltage ≥ 30% of nominal coil voltage
Electrical Endurance ≥ 50,000 operations at rated load
Mechanical Endurance ≥ 10,000,000 operations
Operating Temperature -40°C to +85°C
Safety Approvals TUV, CCC, CE
Use Cases
Telecom Applications
  • Base station DC power distribution and backup battery control
  • Remote radio unit (RRU) and outdoor cabinet switching
  • Equipment room power monitoring and alarm circuits
  • Telecom site remote switching and load shedding
  • Unattended outdoor telecom cabinet control
Key Benefits
Advantages for Telecom
  • Zero steady-state power draw eases DC backup supply load
  • No holding heat inside sealed outdoor enclosures
  • Wide -40°C to +85°C range for unattended outdoor sites
  • Mechanical life ≥ 10,000,000 operations for remote switching
  • Low pick-up voltage for weak driver and monitoring signals

Why are latching relays used in telecom base stations?

Base stations and outdoor cabinets run on limited DC auxiliary power and are often sealed against the environment. Magnetic latching relays draw no coil current after switching, so they avoid holding heat and reduce the load on backup batteries and DC supplies, while keeping contact state stable during power interruptions.

Can these relays be driven by telecom monitoring controllers?

Yes. The low pick-up voltage (≥ 70% of nominal) and short 50–100 ms pulse make these relays suitable for direct drive from microcontroller GPIO pins or driver circuits used in site monitoring and power control units.

How do the relays perform in outdoor telecom cabinets?

The relays are rated for -40°C to +85°C operation, and the LCP housing provides dimensional stability and high dielectric strength across this range, supporting reliable operation in unattended outdoor sites.

Do the relays maintain state during power loss?

Yes. Magnetic latching relays use a permanent magnet to hold contact position after the coil is de-energized, so contact state is retained through power interruptions—an important characteristic for remote and unattended telecom sites.

Material Selection for Telecom Relays

  • Magnet — High Energy Product (e.g., NdFeB): Provides stable holding force over temperature (-40°C to +85°C), ensuring contact state retention through power loss at unattended sites.
  • Coil — High Sensitivity Wire: Enables low power operation with reduced ampere-turns requirement, supporting weak driver signals from site monitoring controllers.
  • Contact Material — Silver Tin Oxide (AgSnO2) for power, Gold-plated for signal: AgSnO2 provides arc resistance for DC distribution switching; gold plating ensures stable low-level contact resistance for alarm and monitoring circuits.
  • Housing — LCP (Liquid Crystal Polymer) for high temperature: Provides dimensional stability across temperature range and high dielectric strength for sealed outdoor enclosures.

Customized Telecom Relay Solutions

Huajin Technology offers customization for telecom infrastructure relays including pulse duration optimization, coil resistance tuning for specific site monitoring and power control circuits, contact material selection, and special housing dimensions for compact cabinet and PCB layouts. With annual capacity of over 10 million magnetic latching relays and about 30% exported, Huajin supplies telecom equipment manufacturers and site power system OEMs with single-phase, two-phase, and three-phase magnetic latching relays, as well as motor relays, under ISO9001-2015, CCC, and TUV certifications.

Huajin Technology Jiaxing Co., Ltd.
  • 0+

    Established in May 2021

  • 0%

    Annual exports account for about 30%

  • 0㎡

    The company occupies an area of 8,000 square meters.

Huajin Technology Jiaxing Co., Ltd. was established in May 2021 and is located at 707 Yanyu Road, Yucheng Town, Haiyan County, Jiaxing City, Zhejiang Province. It is a high-tech enterprise specializing in the research and development, production, and sales of relays.The registered capital of the company is 10 million yuan, covering an area of 8000 square meters, with more than 120 employees. The annual production capacity of magnetic latching relays is over 10 million, of which exports account for about 30%. The company has obtained ISO9001-2015 quality management system certification, and its relays have passed CCC certification, State Grid certification, TUV certification, etc. It also holds multiple technical patents. Our main products include motor relays, single-phase, two-phase, and three-phase magnetic latching relays, which have a wide variety of types and can meet various customized solutions for customers.

Recommended LINS: EV Charging Infrastructure
HAVEN'T FOUND THE PRODUCTS YOU WANT?
CONTACT US