+86-188-5739-7300
CHINA MANUFACTURER

Huajin Technology

Established in 2021, we are a high-tech enterprise specializing in the research, development, and production of magnetic latching relays, serving global industrial and commercial partners.

10M+ Annual Capacity
8,000 SqM Facility
120+ Team Members
30% Exported Globally
CCC Certified State Grid TUV Certified ISO9001 10+ Patents
R&D
Quality
Customization

AC Charging Station Relay

-- Steady & Reliable Manufacturer --

Introduction

AC charging station relays provide the main power switching function in alternating current electric vehicle supply equipment, including residential wall boxes, workplace chargers, and public AC charging posts. These relays connect and disconnect the AC mains supply to the vehicle connector under control of the charging station controller, and must safely interrupt current in the event of fault conditions or normal charging termination. Huajin's AC charging station relays are rated for continuous currents from 16A to 63A at 230/400 VAC, covering single-phase and three-phase AC charging configurations. The contact system uses silver tin oxide with arc-resistant chambers to manage the inductive and capacitive loads present in EV charging circuits. The relays are available with 1A, 2A, and 3-pole contact configurations, with coil voltages of 12V or 24V DC compatible with standard charging controller outputs. Integrated auxiliary contacts for state feedback are available as an option.

Huajin Technology — AC Charging Station Relay Manufacturer

Huajin Technology Jiaxing Co., Ltd. manufactures AC charging station relays for residential and commercial electric vehicle charging equipment. The company operates an 8,000-square-meter production facility in Jiaxing City, Zhejiang Province, with over 120 employees and annual relay output exceeding 10 million units. ISO9001-2015 quality management certification, TUV certification, and CCC certification support product compliance for charging infrastructure projects. Huajin supplies AC charging relays to wall box manufacturers, public charging network operators, and EVSE integrators.

Specifications

Parameter Specification
Contact Configuration 1A, 2A, 3-pole (3P), 4-pole (3P+N)
Contact Material Silver Tin Oxide (AgSnO2)
Continuous Current Rating 16A, 32A, 40A, 63A
Rated Voltage (AC) 230 VAC (single-phase), 400 VAC (three-phase)
Coil Voltage Options 12V, 24V DC
Electrical Endurance ≥ 10,000 operations at rated load
Mechanical Endurance ≥ 100,000 operations
Auxiliary Contact Optional 1A or 1B state feedback
Dielectric Strength (Coil to Contact) 4000 VAC / 1 minute
Operating Temperature -40°C to +70°C
Safety Approvals TUV, CCC, CE
Use Cases
Applications
  • Residential AC wall box chargers (7 kW, 11 kW)
  • Workplace and fleet AC charging posts
  • Public AC charging stations (22 kW)
  • Three-phase AC charging with neutral switching
  • Charging stations with state feedback requirements
Key Benefits
Advantages
  • Current ratings up to 63A for 22 kW three-phase charging
  • Optional auxiliary contacts for state feedback
  • Arc-resistant chamber for charging load switching
  • Coil voltages compatible with standard controllers
  • Compact footprint for wall box enclosures

Frequently Asked Questions

What current rating is required for an 11 kW three-phase charger?

An 11 kW three-phase charger at 400 VAC draws approximately 16A per phase. A 3-pole relay rated at 16A or higher is suitable, with 20A or 25A ratings providing margin for continuous operation and ambient temperature derating.

Is neutral switching required for AC charging stations?

Requirements vary by installation standard and local code. 4-pole relays (3P+N) switch the neutral along with the three phases, which is preferred in some TT and TN-S earthing systems. Single-phase chargers typically use 1A or 2A configurations.

What is the function of the auxiliary contact?

The auxiliary contact provides a low-power signal indicating the main contact position. This feedback allows the charging controller to verify that the relay has closed before starting the charging session, and to confirm disconnection before releasing the connector lock.

How does the relay handle the capacitive load of EV onboard chargers?

EV onboard chargers present capacitive input characteristics, causing inrush current at connection. The relay's AgSnO2 contacts and arc chamber are designed to withstand inrush currents up to 10 times rated current, and pre-charge circuits in the vehicle further limit inrush.

Material Selection Guide

  • Contact Material — Silver Tin Oxide (AgSnO2): Handles the capacitive inrush and inductive load characteristics of EV charging circuits with resistance to contact welding.
  • Arc Chamber — High Temperature Thermoplastic: Contains and extinguishes arcs during charging session termination and fault interruption.
  • Coil — Class F Enamelled Copper Wire: Provides thermal endurance for continuous duty in wall box enclosures with limited ventilation.
  • Housing — UL94 V-0 PBT or PA66: Provides dielectric strength and flame resistance for outdoor-rated charging enclosures.

Production and Customization Services

Huajin Technology offers customization for AC charging station relays including pole configurations (1P, 2P, 3P, 3P+N), current ratings, auxiliary contact options, coil voltages, and terminal types for specific wall box and charging post designs. We support validation testing to TUV and CCC standards for charging station certification.

Huajin Technology Jiaxing Co., Ltd.
  • 0+

    Established in May 2021

  • 0%

    Annual exports account for about 30%

  • 0㎡

    The company occupies an area of 8,000 square meters.

Huajin Technology Jiaxing Co., Ltd. was established in May 2021 and is located at 707 Yanyu Road, Yucheng Town, Haiyan County, Jiaxing City, Zhejiang Province. It is a high-tech enterprise specializing in the research and development, production, and sales of relays.The registered capital of the company is 10 million yuan, covering an area of 8000 square meters, with more than 120 employees. The annual production capacity of magnetic latching relays is over 10 million, of which exports account for about 30%. The company has obtained ISO9001-2015 quality management system certification, and its relays have passed CCC certification, State Grid certification, TUV certification, etc. It also holds multiple technical patents. Our main products include motor relays, single-phase, two-phase, and three-phase magnetic latching relays, which have a wide variety of types and can meet various customized solutions for customers.

Recommended LINS: EV Charging Station Relays AC Control Relays DC Charging Station Relay Relay for Harsh Environment Relay for Overvoltage Protector Custom Magnetic Latching Relays DIN Rail Meter Relays Energy Meter Relay
HAVEN'T FOUND THE PRODUCTS YOU WANT?
CONTACT US