+86-188-5739-7300
CHINA MANUFACTURER

Huajin Technology

Established in 2021, we are a high-tech enterprise specializing in the research, development, and production of magnetic latching relays, serving global industrial and commercial partners.

10M+ Annual Capacity
8,000 SqM Facility
120+ Team Members
30% Exported Globally
CCC Certified State Grid TUV Certified ISO9001 10+ Patents
R&D
Quality
Customization

Relay for Overvoltage Protector

-- Steady & Reliable Manufacturer --

Introduction

Relays for overvoltage protectors serve as the switching element in voltage monitoring and protection devices installed in distribution boards, industrial panels, and equipment power feeds. When the monitored supply voltage exceeds a preset threshold, the relay disconnects the load to prevent insulation stress, electronic component failure, and fire risk from sustained overvoltage. Huajin's relays for overvoltage protectors are available with 1A and 1C contact configurations rated from 10A to 30A, supporting direct control of contactors and load circuits in 230/400 VAC systems. The relays are designed for continuous voltage monitoring duty, with magnetic latching variants that draw no coil power in the steady state. Dielectric strength of 4000 VAC between coil and contacts supports isolation requirements in protection devices connected directly to the mains. Electrical life exceeds 50,000 operations, and the relays are tested for immunity to voltage transients per IEC 61000-4-5.

Huajin Technology — Overvoltage Protector Relay Manufacturer

Huajin Technology Jiaxing Co., Ltd. manufactures relays for overvoltage protection devices used in residential, commercial, and industrial electrical systems. Operating from an 8,000-square-meter facility in Jiaxing City, the company employs over 120 staff and produces more than 10 million relays annually. ISO9001-2015 quality management certification, TUV certification, and CCC certification support product compliance for electrical protection equipment. Huajin supplies protection relays to voltage monitor manufacturers, distribution board OEMs, and electrical safety equipment suppliers.

Specifications

Parameter Specification
Contact Configuration 1A (SPST-NO), 1C (SPDT)
Contact Material Silver Tin Oxide (AgSnO2)
Contact Current Rating 10A, 16A, 20A, 30A
Rated Voltage (AC) 230 VAC, 400 VAC
Coil Voltage Options 12V, 24V, 48V DC
Dielectric Strength (Coil to Contact) 4000 VAC / 1 minute
Surge Immunity IEC 61000-4-5, 2 kV (1.2/50 µs)
Electrical Endurance ≥ 50,000 operations at rated load
Mechanical Endurance ≥ 1,000,000 operations
Operating Temperature -25°C to +70°C
Safety Approvals TUV, CCC, CE
Use Cases
Applications
  • Residential distribution board overvoltage protection
  • Industrial control panel voltage monitoring
  • Equipment power feed protection devices
  • Three-phase overvoltage monitoring relays
  • Overvoltage and undervoltage combined protectors
Key Benefits
Advantages
  • High dielectric strength (4000 VAC) for mains-connected devices
  • Surge immunity tested to IEC 61000-4-5
  • Zero steady-state coil power with latching option
  • Contact ratings for direct contactor control
  • Compact design for DIN rail protection devices

Frequently Asked Questions

What is the difference between an overvoltage relay and a surge protective device?

An overvoltage relay responds to sustained voltage rises lasting several cycles or more, disconnecting the load to prevent damage. A surge protective device (SPD) clamps short-duration transients in microseconds. Both functions are complementary in electrical protection schemes.

What surge immunity level is required for mains-connected protection devices?

IEC 61000-4-5 specifies surge immunity testing at 1 kV to 2 kV for typical installation categories. Our relays are tested at 2 kV (1.2/50 µs) to ensure reliable operation in protection devices exposed to mains transients.

Can the relay control a contactor for larger loads?

Yes. The 10A to 30A contact ratings are suitable for pilot duty control of contactors with coil currents within this range, allowing the protection device to disconnect loads larger than the relay's direct switching capacity.

Is manual reset available after an overvoltage trip?

Manual reset is implemented in the protection device controller rather than the relay itself. The relay supports both momentary pulse and continuous coil drive, compatible with automatic or manual reset logic.

Material Selection Guide

  • Contact Material — Silver Tin Oxide (AgSnO2): Provides reliable switching of contactor coils and resistive loads in protection devices, with arc resistance for repeated operation.
  • Coil Insulation — Class F Enamelled Wire: Withstands elevated temperatures in protection devices mounted in distribution boards with limited ventilation.
  • Housing — High CTI PBT (CTI ≥ 600V): Provides insulation coordination for mains-connected devices requiring 4000 VAC dielectric strength.
  • Terminals — Brass with Tin Plating: Ensures reliable PCB or screw connections in protection device assemblies.

Production and Customization Services

Huajin Technology offers customization for overvoltage protector relays including contact current ratings, coil voltages, contact configurations, and dielectric strength requirements. OEM services include custom PCB pinouts, matched relay pairs for overvoltage and undervoltage functions, and validation testing to IEC 61000-4-5 surge immunity standards.

Huajin Technology Jiaxing Co., Ltd.
  • 0+

    Established in May 2021

  • 0%

    Annual exports account for about 30%

  • 0㎡

    The company occupies an area of 8,000 square meters.

Huajin Technology Jiaxing Co., Ltd. was established in May 2021 and is located at 707 Yanyu Road, Yucheng Town, Haiyan County, Jiaxing City, Zhejiang Province. It is a high-tech enterprise specializing in the research and development, production, and sales of relays.The registered capital of the company is 10 million yuan, covering an area of 8000 square meters, with more than 120 employees. The annual production capacity of magnetic latching relays is over 10 million, of which exports account for about 30%. The company has obtained ISO9001-2015 quality management system certification, and its relays have passed CCC certification, State Grid certification, TUV certification, etc. It also holds multiple technical patents. Our main products include motor relays, single-phase, two-phase, and three-phase magnetic latching relays, which have a wide variety of types and can meet various customized solutions for customers.

Recommended LINS: Overvoltage Protection Relays Relay for Harsh Environment Overvoltage Protection EV Charging Station Relays Low Power Consumption Relay AC Charging Station Relay Multi Circuit Relay Control Dual Circuit Relay Control
HAVEN'T FOUND THE PRODUCTS YOU WANT?
CONTACT US