Single Phase Relay Control
-- Steady & Reliable Manufacturer --
Introduction
Single phase relay control products manage switching operations in single-phase AC circuits for residential, commercial, and light industrial equipment. These relays are used in applications where only line and neutral conductors require switching, including lighting control, small appliance switching, heating element control, and single-phase motor starting. Huajin's single phase relays cover contact current ratings from 10A to 60A, supporting loads from small control circuits up to 13 kW resistive heating elements at 230 VAC. The relays are available in 1A, 1C, and 2A contact forms with coil voltages from 5V to 220V DC and AC options. Magnetic latching variants eliminate coil power consumption in steady-state operation, a benefit for thermostats and timers that hold state for extended periods. The relays comply with IEC 61810 for electromechanical elementary relays, with mechanical life exceeding 1,000,000 operations and electrical life of ≥ 50,000 cycles at rated load.
Huajin Technology — Single Phase Relay Manufacturer
Huajin Technology Jiaxing Co., Ltd. manufactures single phase relays for appliance control, lighting systems, and electrical heating equipment. Operating from an 8,000-square-meter facility in Jiaxing City with over 120 employees, the company produces more than 10 million relays annually. ISO9001-2015 quality management certification, TUV certification, and CCC certification ensure product compliance for domestic and export markets. Huajin supplies single phase relays to appliance manufacturers, lighting control companies, and HVAC equipment OEMs.
Specifications
| Parameter | Specification |
|---|---|
| Contact Configuration | 1A (SPST-NO), 1C (SPDT), 2A (DPST-NO) |
| Contact Material | Silver Tin Oxide (AgSnO2), Silver Nickel (AgNi) |
| Contact Current Rating | 10A – 60A |
| Rated Voltage (AC) | 230 VAC, 250 VAC, 277 VAC |
| Coil Voltage Options | 5V, 12V, 24V, 48V, 110V DC / 24V, 230V AC |
| Electrical Endurance | ≥ 50,000 operations at rated load |
| Mechanical Endurance | ≥ 1,000,000 operations |
| Coil Power Consumption | Approx. 0.5W – 2.0W (latching pulse or continuous) |
| Dielectric Strength (Coil to Contact) | 2500 VAC / 1 minute |
| Operating Temperature | -25°C to +70°C |
| Safety Approvals | TUV, CCC, CE |
Applications
- Residential lighting and heating control
- Small appliance switching (ovens, kettles)
- Single phase motor starting (pumps, fans)
- Thermostat and timer output switching
- Commercial lighting control panels
Advantages
- Wide current range (10A–60A) for diverse loads
- Zero standby power with latching design
- AC and DC coil options available
- Compact PCB or panel-mount designs
- High electrical life for thermostat applications
Frequently Asked Questions
What is the difference between 1A and 1C contact configurations?
1A (SPST-NO) is a normally open contact that closes when the coil is energized. 1C (SPDT) is a changeover contact with common, normally open, and normally closed terminals, allowing the relay to switch between two circuits.
Can these relays switch 230 VAC heating elements directly?
Yes. Models rated at 30A and above can switch resistive heating loads up to 6.9 kW at 230 VAC. For larger heating elements, the relay should pilot a contactor or solid-state relay.
What is the advantage of latching for thermostat applications?
Thermostats hold their output state for hours or days. A latching relay consumes no power during this period, eliminating self-heating that could affect temperature sensing accuracy and reducing energy consumption in battery-powered thermostats.
Are AC coil versions available?
Yes. AC coil options at 24V and 230V are available for applications where a DC supply is not present, such as direct connection to control transformers in HVAC equipment.
Material Selection Guide
- Contact Material — Silver Tin Oxide (AgSnO2): Standard for resistive and inductive AC loads, providing arc resistance for heating and lighting applications.
- Contact Material — Silver Nickel (AgNi): Suitable for lower current resistive loads where low contact resistance is required.
- Coil — Enamelled Copper Wire (Class B or F): Class F is recommended for AC coil versions operating from control transformers with elevated ambient temperatures.
- Housing — PBT or PA66 (UL94 V-0): Provides dielectric strength and dimensional stability for PCB and panel mounting.
Production and Customization Services
Huajin Technology offers customization for single phase relays including contact current ratings, coil voltage and resistance, terminal configurations (PCB pin, quick-connect, screw), and latching versus non-latching operation. We support appliance OEM projects with custom wire harnesses, specific agency certifications, and packaging for automated assembly lines.
-
0+
Established in May 2021
-
0%
Annual exports account for about 30%
-
0㎡
The company occupies an area of 8,000 square meters.
Huajin Technology Jiaxing Co., Ltd. was established in May 2021 and is located at 707 Yanyu Road, Yucheng Town, Haiyan County, Jiaxing City, Zhejiang Province. It is a high-tech enterprise specializing in the research and development, production, and sales of relays.The registered capital of the company is 10 million yuan, covering an area of 8000 square meters, with more than 120 employees. The annual production capacity of magnetic latching relays is over 10 million, of which exports account for about 30%. The company has obtained ISO9001-2015 quality management system certification, and its relays have passed CCC certification, State Grid certification, TUV certification, etc. It also holds multiple technical patents. Our main products include motor relays, single-phase, two-phase, and three-phase magnetic latching relays, which have a wide variety of types and can meet various customized solutions for customers.

English
中文简体
русский











