Data Center Power
-- Steady & Reliable Manufacturer --
Data Center Power
Data center power chains—from utility feed through UPS, PDU, and rack-level distribution—must deliver continuous availability with minimal losses and tightly controlled heat. Magnetic latching relays fit this environment because they hold contact state without continuous coil power. A 50–100 ms pulse at 0.5W to 1.5W switches state, after which the relay draws zero steady-state power, eliminating holding heat inside dense rack PDUs and sealed power shelves. Contact ratings of 5A to 30A with AgSnO2 contacts handle load and inrush switching, while mechanical life exceeding 10,000,000 operations supports the frequent transfer and maintenance switching typical of data center operations. The -40°C to +85°C range and low pick-up voltage make these relays suitable for rack PDUs, automatic transfer switching, battery backup control, and remote power monitoring in mission-critical facilities.
Huajin Technology — Relay Manufacturer for Data Center Power
Huajin Technology Jiaxing Co., Ltd. was established in May 2021 and is located at 707 Yanyu Road, Yucheng Town, Haiyan County, Jiaxing City, Zhejiang Province. It is a high-tech enterprise specializing in the research and development, production, and sales of relays. The registered capital of the company is 10 million yuan, covering an area of 8,000 square meters, with more than 120 employees. The annual production capacity of magnetic latching relays is over 10 million, of which exports account for about 30%. The company has obtained ISO9001-2015 quality management system certification, and its relays have passed CCC certification, State Grid certification, TUV certification, etc. It also holds multiple technical patents. Main products include motor relays and single-phase, two-phase, and three-phase magnetic latching relays, with a wide variety of types to meet various customized solutions for data center power customers.
Specifications for Data Center Applications
| Parameter | Specification |
|---|---|
| Contact Configuration | 1A, 1C, 2A, 2C |
| Contact Material | AgSnO2, AgNi, Au-plated (signal) |
| Contact Current Rating | 5A – 30A |
| Coil Voltage Options | 3V, 5V, 12V, 24V, 48V DC |
| Coil Power (Pulse) | 0.5W – 1.5W (50–100 ms pulse) |
| Steady State Power | 0 W (latching holds state) |
| Pick-up Voltage | ≥ 70% of nominal coil voltage |
| Drop-out Voltage | ≥ 30% of nominal coil voltage |
| Electrical Endurance | ≥ 50,000 operations at rated load |
| Mechanical Endurance | ≥ 10,000,000 operations |
| Operating Temperature | -40°C to +85°C |
| Safety Approvals | TUV, CCC, CE |
Data Center Applications
- Rack PDUs and intelligent power strips
- UPS and battery backup transfer control
- Automatic transfer switches (ATS) and static transfer circuits
- Power shelf and busway branch switching
- Remote power monitoring and load shedding in white space
Advantages for Data Center Power
- Zero holding heat in dense rack PDUs and sealed power shelves
- Zero steady-state power draw improves PUE and backup budget
- Mechanical life ≥ 10,000,000 operations for frequent transfer
- AgSnO2 contacts resist inrush and load switching arcs
- Low pick-up voltage for direct drive from monitoring MCUs
Why use latching relays in rack PDUs and power shelves?
Dense rack PDUs and sealed power shelves have limited airflow and tight thermal budgets. Magnetic latching relays draw no coil current after switching, so they produce no holding heat and add no steady-state load to the power chain—both important for efficiency and reliability in data centers.
Are these relays suitable for automatic transfer switching?
Yes. The 50–100 ms pulse, high mechanical endurance (≥ 10,000,000 operations), and AgSnO2 contacts make these relays suitable for transfer and maintenance switching circuits, while latching behavior keeps state stable if control power is interrupted.
Can they be driven by rack PDU monitoring controllers?
Yes. The low pick-up voltage (≥ 70% of nominal) and short pulse duration allow direct drive from microcontroller GPIO pins or driver circuits used in intelligent PDUs and power monitoring units.
Do the relays hold state during a power event?
Yes. The permanent magnet holds contact position after the coil is de-energized, so the relay retains its state through control power loss—useful for maintaining configured distribution paths during outages or maintenance.
Why use latching relays in rack PDUs and power shelves?
Dense rack PDUs and sealed power shelves have limited airflow and tight thermal budgets. Magnetic latching relays draw no coil current after switching, so they produce no holding heat and add no steady-state load to the power chain—both important for efficiency and reliability in data centers.
Are these relays suitable for automatic transfer switching?
Yes. The 50–100 ms pulse, high mechanical endurance (≥ 10,000,000 operations), and AgSnO2 contacts make these relays suitable for transfer and maintenance switching circuits, while latching behavior keeps state stable if control power is interrupted.
Can they be driven by rack PDU monitoring controllers?
Yes. The low pick-up voltage (≥ 70% of nominal) and short pulse duration allow direct drive from microcontroller GPIO pins or driver circuits used in intelligent PDUs and power monitoring units.
Do the relays hold state during a power event?
Yes. The permanent magnet holds contact position after the coil is de-energized, so the relay retains its state through control power loss—useful for maintaining configured distribution paths during outages or maintenance.
Material Selection for Data Center Relays
- Magnet — High Energy Product (e.g., NdFeB): Provides stable holding force over temperature (-40°C to +85°C), ensuring contact state retention through control power loss in critical power paths.
- Coil — High Sensitivity Wire: Enables low power operation with reduced ampere-turns requirement, supporting weak driver signals from PDU monitoring controllers.
- Contact Material — Silver Tin Oxide (AgSnO2) for power, Gold-plated for signal: AgSnO2 provides arc and inrush resistance for load switching; gold plating ensures stable low-level contact resistance for monitoring and signal circuits.
- Housing — LCP (Liquid Crystal Polymer) for high temperature: Provides dimensional stability across temperature range and high dielectric strength for dense, sealed power enclosures.
Customized Data Center Power Relay Solutions
Huajin Technology offers customization for data center power relays including pulse duration optimization, coil resistance tuning for specific PDU and monitoring driver circuits, contact material selection for inrush and load switching, and special housing dimensions for compact rack PDU and power shelf layouts. With annual capacity of over 10 million magnetic latching relays and about 30% exported, Huajin supplies data center power equipment manufacturers and PDU/UPS OEMs with single-phase, two-phase, and three-phase magnetic latching relays, as well as motor relays, under ISO9001-2015, CCC, and TUV certifications.
-
0+
Established in May 2021
-
0%
Annual exports account for about 30%
-
0㎡
The company occupies an area of 8,000 square meters.
Huajin Technology Jiaxing Co., Ltd. was established in May 2021 and is located at 707 Yanyu Road, Yucheng Town, Haiyan County, Jiaxing City, Zhejiang Province. It is a high-tech enterprise specializing in the research and development, production, and sales of relays.The registered capital of the company is 10 million yuan, covering an area of 8000 square meters, with more than 120 employees. The annual production capacity of magnetic latching relays is over 10 million, of which exports account for about 30%. The company has obtained ISO9001-2015 quality management system certification, and its relays have passed CCC certification, State Grid certification, TUV certification, etc. It also holds multiple technical patents. Our main products include motor relays, single-phase, two-phase, and three-phase magnetic latching relays, which have a wide variety of types and can meet various customized solutions for customers.

English
中文简体
русский











