+86-188-5739-7300
CHINA MANUFACTURER

Huajin Technology

Established in 2021, we are a high-tech enterprise specializing in the research, development, and production of magnetic latching relays, serving global industrial and commercial partners.

10M+ Annual Capacity
8,000 SqM Facility
120+ Team Members
30% Exported Globally
CCC Certified State Grid TUV Certified ISO9001 10+ Patents
R&D
Quality
Customization

Low Power Consumption Relay

-- Steady & Reliable Manufacturer --

Introduction

Low power consumption relays are engineered for applications where energy efficiency and thermal management are critical. These relays utilize magnetic latching technology to eliminate coil power consumption in the steady state, with power only required during the switching transition. A typical pulse of 50–100 ms at 0.5W to 1.5W is sufficient to change the contact state, after which the relay maintains its position without any power draw. This characteristic makes low power relays suitable for battery-powered equipment, energy metering devices, and IoT-enabled control systems where power budgets are constrained. Contact ratings range from 5A to 30A for AC and DC loads, with mechanical life exceeding 10,000,000 operations. The relays feature high sensitivity coil designs with pick-up voltages as low as 70% of nominal coil voltage, enabling operation with weak driver signals.

Huajin Technology — Low Power Relay Manufacturer

Huajin Technology Jiaxing Co., Ltd. specializes in low power consumption relays for energy-sensitive applications. The company's 8,000-square-meter facility in Jiaxing City employs over 120 staff, producing more than 10 million relays annually. ISO9001-2015 certification, TUV certification, and CCC certification ensure product quality for global markets. Huajin supplies low power relays to smart meter manufacturers, IoT device developers, and battery-powered equipment OEMs.

Specifications

Parameter Specification
Contact Configuration 1A, 1C, 2A, 2C
Contact Material AgSnO2, AgNi, Au-plated (signal)
Contact Current Rating 5A – 30A
Coil Voltage Options 3V, 5V, 12V, 24V, 48V DC
Coil Power (Pulse) 0.5W – 1.5W (50–100 ms pulse)
Steady State Power 0 W (latching holds state)
Pick-up Voltage ≥ 70% of nominal coil voltage
Drop-out Voltage ≥ 30% of nominal coil voltage
Electrical Endurance ≥ 50,000 operations at rated load
Mechanical Endurance ≥ 10,000,000 operations
Operating Temperature -40°C to +85°C
Safety Approvals TUV, CCC, CE
Use Cases
Applications
  • Smart meters and energy measurement devices
  • IoT sensors and wireless control nodes
  • Battery-powered equipment (medical, portable)
  • Solar-powered control systems
  • Energy harvesting applications
Key Benefits
Advantages
  • Zero standby power consumption
  • Wide operating temperature range (-40°C to +85°C)
  • Low pick-up voltage for weak driver compatibility
  • High mechanical life for frequent switching
  • Compact design for space-constrained applications
How does magnetic latching reduce power consumption?

Magnetic latching relays use a permanent magnet to maintain the contact position after the coil is de-energized. Power is only required for the 50–100 ms switching pulse. In the steady state, no current flows through the coil, resulting in zero standby power consumption.

What is the typical pulse duration required for switching?

A pulse duration of 50–100 ms is typically sufficient to reliably set or reset the relay. The required pulse width depends on the coil voltage and specific relay model.

Can these relays be driven directly by microcontroller GPIO pins?

Yes. The low pick-up voltage (≥ 70% of nominal) and short pulse duration make these relays suitable for direct drive from microcontroller GPIO pins or dedicated driver ICs.

What is the contact resistance stability over life?

Contact resistance remains stable at ≤ 50 mΩ over the rated electrical life under clean load conditions. Contact materials are selected to minimize oxidation and wear.

Material Selection Guide

  • Magnet — High Energy Product (e.g., NdFeB): Provides stable holding force over temperature (-40°C to +85°C), ensuring reliable state retention.
  • Coil — High Sensitivity Wire: Enables low power operation with reduced ampere-turns requirement.
  • Contact Material — Silver Tin Oxide (AgSnO2) for power, Gold-plated for signal: AgSnO2 provides arc resistance for power loads, gold plating ensures stable low-level contact resistance for signal switching.
  • Housing — LCP (Liquid Crystal Polymer) for high temperature: Provides dimensional stability across temperature range and high dielectric strength.
Huajin Technology Jiaxing Co., Ltd.
  • 0+

    Established in May 2021

  • 0%

    Annual exports account for about 30%

  • 0㎡

    The company occupies an area of 8,000 square meters.

Huajin Technology Jiaxing Co., Ltd. was established in May 2021 and is located at 707 Yanyu Road, Yucheng Town, Haiyan County, Jiaxing City, Zhejiang Province. It is a high-tech enterprise specializing in the research and development, production, and sales of relays.The registered capital of the company is 10 million yuan, covering an area of 8000 square meters, with more than 120 employees. The annual production capacity of magnetic latching relays is over 10 million, of which exports account for about 30%. The company has obtained ISO9001-2015 quality management system certification, and its relays have passed CCC certification, State Grid certification, TUV certification, etc. It also holds multiple technical patents. Our main products include motor relays, single-phase, two-phase, and three-phase magnetic latching relays, which have a wide variety of types and can meet various customized solutions for customers.

Recommended LINS: Relay for Overvoltage Protector Relay for Harsh Environment Power Distribution Systems Three Phase Relay Solutions PCB Mount Relays Energy Meter Relay AC Charging Station Relay Multi Circuit Relay Control
HAVEN'T FOUND THE PRODUCTS YOU WANT?
CONTACT US