Power Distribution Systems
-- Steady & Reliable Manufacturer --
Power Distribution Systems
Power distribution systems require switching components that deliver high contact reliability, arc resistance, and long mechanical life under frequent operation and harsh environmental conditions. Magnetic latching relays are increasingly adopted in distribution equipment because they hold contact state without continuous coil power, reducing heat generation inside enclosed cabinets and lowering auxiliary power demand. A 50–100 ms pulse at 0.5W to 1.5W is sufficient to change state, after which the relay maintains position with zero steady-state power draw. With contact ratings from 5A to 30A, AgSnO2 contact materials for arc resistance, and an operating temperature range of -40°C to +85°C, these relays support control and signal switching in distribution cabinets, ring main units, and distribution automation terminals. Mechanical life exceeding 10,000,000 operations meets the long service intervals expected in distribution networks.
Huajin Technology — Relay Manufacturer for Power Distribution
Huajin Technology Jiaxing Co., Ltd. was established in May 2021 and is located at 707 Yanyu Road, Yucheng Town, Haiyan County, Jiaxing City, Zhejiang Province. It is a high-tech enterprise specializing in the research and development, production, and sales of relays. The registered capital of the company is 10 million yuan, covering an area of 8,000 square meters, with more than 120 employees. The annual production capacity of magnetic latching relays is over 10 million, of which exports account for about 30%. The company has obtained ISO9001-2015 quality management system certification, and its relays have passed CCC certification, State Grid certification, TUV certification, etc. It also holds multiple technical patents. Main products include motor relays and single-phase, two-phase, and three-phase magnetic latching relays, with a wide variety of types to meet various customized solutions for power distribution customers.
Specifications for Distribution Applications
| Parameter | Specification |
|---|---|
| Contact Configuration | 1A, 1C, 2A, 2C |
| Contact Material | AgSnO2, AgNi, Au-plated (signal) |
| Contact Current Rating | 5A – 30A |
| Coil Voltage Options | 3V, 5V, 12V, 24V, 48V DC |
| Coil Power (Pulse) | 0.5W – 1.5W (50–100 ms pulse) |
| Steady State Power | 0 W (latching holds state) |
| Pick-up Voltage | ≥ 70% of nominal coil voltage |
| Drop-out Voltage | ≥ 30% of nominal coil voltage |
| Electrical Endurance | ≥ 50,000 operations at rated load |
| Mechanical Endurance | ≥ 10,000,000 operations |
| Operating Temperature | -40°C to +85°C |
| Safety Approvals | TUV, CCC, CE, State Grid |
Distribution Applications
- Low-voltage distribution cabinets and switchgear
- Ring main units and secondary distribution equipment
- Distribution automation terminals (DTU/FTU/TTU)
- Load switch and capacitor bank control circuits
- Remote switching in State Grid distribution projects
Advantages for Distribution
- Zero steady-state power draw reduces cabinet heat
- AgSnO2 contacts resist arcing under load switching
- Wide operating range (-40°C to +85°C) for outdoor cabinets
- Mechanical life ≥ 10,000,000 operations for frequent switching
- State Grid, TUV, and CCC certified for distribution use
Why use latching relays in distribution cabinets?
Distribution cabinets are enclosed spaces where heat and auxiliary power demand matter. Magnetic latching relays draw no coil current in steady state, so they generate no holding heat and reduce the burden on cabinet auxiliary supplies, while maintaining contact state reliably over long periods.
Are these relays suitable for distribution automation terminals?
Yes. The low pick-up voltage (≥ 70% of nominal) and short 50–100 ms pulse make these relays suitable for direct drive from the MCU GPIO pins or driver circuits used in DTU, FTU, and TTU terminals.
How do the relays handle arc and inrush current?
Power versions use AgSnO2 contacts, which provide arc resistance for load switching. Electrical endurance is rated at ≥ 50,000 operations at rated load, and contact resistance remains stable under clean load conditions.
Are the relays certified for State Grid distribution projects?
Yes. Huajin relays have passed CCC certification, State Grid certification, and TUV certification, and the company holds ISO9001-2015 quality management system certification and multiple technical patents.
Why use latching relays in distribution cabinets?
Distribution cabinets are enclosed spaces where heat and auxiliary power demand matter. Magnetic latching relays draw no coil current in steady state, so they generate no holding heat and reduce the burden on cabinet auxiliary supplies, while maintaining contact state reliably over long periods.
Are these relays suitable for distribution automation terminals?
Yes. The low pick-up voltage (≥ 70% of nominal) and short 50–100 ms pulse make these relays suitable for direct drive from the MCU GPIO pins or driver circuits used in DTU, FTU, and TTU terminals.
How do the relays handle arc and inrush current?
Power versions use AgSnO2 contacts, which provide arc resistance for load switching. Electrical endurance is rated at ≥ 50,000 operations at rated load, and contact resistance remains stable under clean load conditions.
Are the relays certified for State Grid distribution projects?
Yes. Huajin relays have passed CCC certification, State Grid certification, and TUV certification, and the company holds ISO9001-2015 quality management system certification and multiple technical patents.
Material Selection for Distribution Relays
- Magnet — High Energy Product (e.g., NdFeB): Provides stable holding force over temperature (-40°C to +85°C), ensuring contact state retention in outdoor and indoor distribution enclosures.
- Coil — High Sensitivity Wire: Enables low power operation with reduced ampere-turns requirement, supporting weak driver signals from automation terminals.
- Contact Material — Silver Tin Oxide (AgSnO2) for power, Gold-plated for signal: AgSnO2 provides arc resistance for load and capacitor switching; gold plating ensures stable low-level contact resistance for control and signal circuits.
- Housing — LCP (Liquid Crystal Polymer) for high temperature: Provides dimensional stability across temperature range and high dielectric strength for distribution equipment environments.
Customized Distribution Relay Solutions
Huajin Technology offers customization for power distribution relays including pulse duration optimization, coil resistance tuning for specific automation terminal driver circuits, contact material selection for load and capacitor switching, and special housing dimensions for panel and PCB layout constraints. With annual capacity of over 10 million magnetic latching relays and about 30% exported, Huajin supplies distribution equipment manufacturers and automation terminal OEMs with single-phase, two-phase, and three-phase magnetic latching relays, as well as motor relays, under ISO9001-2015, CCC, State Grid, and TUV certifications.
-
0+
Established in May 2021
-
0%
Annual exports account for about 30%
-
0㎡
The company occupies an area of 8,000 square meters.
Huajin Technology Jiaxing Co., Ltd. was established in May 2021 and is located at 707 Yanyu Road, Yucheng Town, Haiyan County, Jiaxing City, Zhejiang Province. It is a high-tech enterprise specializing in the research and development, production, and sales of relays.The registered capital of the company is 10 million yuan, covering an area of 8000 square meters, with more than 120 employees. The annual production capacity of magnetic latching relays is over 10 million, of which exports account for about 30%. The company has obtained ISO9001-2015 quality management system certification, and its relays have passed CCC certification, State Grid certification, TUV certification, etc. It also holds multiple technical patents. Our main products include motor relays, single-phase, two-phase, and three-phase magnetic latching relays, which have a wide variety of types and can meet various customized solutions for customers.

English
中文简体
русский











