+86-188-5739-7300
CHINA MANUFACTURER

Huajin Technology

Established in 2021, we are a high-tech enterprise specializing in the research, development, and production of magnetic latching relays, serving global industrial and commercial partners.

10M+ Annual Capacity
8,000 SqM Facility
120+ Team Members
30% Exported Globally
CCC Certified State Grid TUV Certified ISO9001 10+ Patents
R&D
Quality
Customization

Capacitor Bank Relay

-- Steady & Reliable Manufacturer --

Capacitor Bank Relay

Capacitor bank switching is one of the most demanding relay duties in power systems. Closing a capacitor bank produces high inrush current, while opening it can cause restriking and arc erosion. Relays used for capacitor bank control must combine high contact endurance with reliable, repeatable switching. Huajin magnetic latching capacitor bank relays meet this requirement by holding contact state with a permanent magnet, so a 50–100 ms pulse at 0.5W to 1.5W is all that is needed to switch—after which zero steady-state coil power is drawn and no holding heat is generated. AgSnO2 contact material provides arc resistance for capacitor switching, contact ratings of 5A to 30A cover typical compensation stages, and mechanical life exceeding 10,000,000 operations supports frequent stage-by-stage switching in automatic power factor correction (APFC) panels.

Huajin Technology — Capacitor Bank Relay Manufacturer

Huajin Technology Jiaxing Co., Ltd. was established in May 2021 and is located at 707 Yanyu Road, Yucheng Town, Haiyan County, Jiaxing City, Zhejiang Province. It is a high-tech enterprise specializing in the research and development, production, and sales of relays. The registered capital of the company is 10 million yuan, covering an area of 8,000 square meters, with more than 120 employees. The annual production capacity of magnetic latching relays is over 10 million, of which exports account for about 30%. The company has obtained ISO9001-2015 quality management system certification, and its relays have passed CCC certification, State Grid certification, TUV certification, etc. It also holds multiple technical patents. Main products include motor relays and single-phase, two-phase, and three-phase magnetic latching relays, with a wide variety of types to meet various customized solutions for capacitor bank customers.

Specifications for Capacitor Bank Applications

Parameter Specification
Contact Configuration 1A, 1C, 2A, 2C
Contact Material AgSnO2, AgNi, Au-plated (signal)
Contact Current Rating 5A – 30A
Coil Voltage Options 3V, 5V, 12V, 24V, 48V DC
Coil Power (Pulse) 0.5W – 1.5W (50–100 ms pulse)
Steady State Power 0 W (latching holds state)
Pick-up Voltage ≥ 70% of nominal coil voltage
Drop-out Voltage ≥ 30% of nominal coil voltage
Electrical Endurance ≥ 50,000 operations at rated load
Mechanical Endurance ≥ 10,000,000 operations
Operating Temperature -40°C to +85°C
Safety Approvals TUV, CCC, CE, State Grid
Use Cases
Capacitor Bank Applications
  • Automatic power factor correction (APFC) panels
  • Reactive power compensation stages
  • Capacitor step switching in distribution cabinets
  • Detuned and harmonic-filtered capacitor banks
  • Reactive power control in State Grid projects
Key Benefits
Advantages for Capacitor Switching
  • AgSnO2 contacts resist inrush and switching arcs
  • Zero steady-state coil power; no holding heat in APFC panels
  • Mechanical life ≥ 10,000,000 operations for frequent stepping
  • State retained through control power interruptions
  • State Grid, TUV, and CCC certified for compensation use

Why are latching relays preferred for capacitor bank switching?

Capacitor stages are switched frequently by the power factor controller. Latching relays consume power only during the 50–100 ms pulse, so they avoid continuous coil heating in the APFC panel and reduce auxiliary power demand, while keeping the stage state stable if control power is interrupted.

How do the relays handle capacitor inrush current?

Power versions use AgSnO2 contact material, which provides arc resistance and withstands the inrush associated with capacitor closing. Electrical endurance is rated at ≥ 50,000 operations at rated load under specified conditions.

Can these relays be used with detuned or harmonic-filtered banks?

Yes, they can be used in detuned and harmonic-filtered capacitor banks. Contact material and coil drive can be customized to match the specific stage current, switching frequency, and controller driver circuit.

Are the relays certified for State Grid compensation projects?

Yes. Huajin relays have passed CCC certification, State Grid certification, and TUV certification, and the company holds ISO9001-2015 quality management system certification and multiple technical patents.

Material Selection for Capacitor Bank Relays

  • Magnet — High Energy Product (e.g., NdFeB): Provides stable holding force over temperature (-40°C to +85°C), ensuring stage state retention through controller power loss.
  • Coil — High Sensitivity Wire: Enables low power operation with reduced ampere-turns requirement, supporting weak driver signals from power factor controllers.
  • Contact Material — Silver Tin Oxide (AgSnO2) for power: AgSnO2 provides arc resistance for capacitor closing and opening; gold-plated contacts are available for signal and control circuits.
  • Housing — LCP (Liquid Crystal Polymer) for high temperature: Provides dimensional stability across temperature range and high dielectric strength for panel-mounted compensation equipment.

Customized Capacitor Bank Relay Solutions

Huajin Technology offers customization for capacitor bank relays including pulse duration optimization, coil resistance tuning for specific power factor controller driver circuits, contact material selection for inrush and harmonic-rich conditions, and special housing dimensions for APFC panel layouts. With annual capacity of over 10 million magnetic latching relays and about 30% exported, Huajin supplies compensation equipment manufacturers and APFC panel OEMs with single-phase, two-phase, and three-phase magnetic latching relays, as well as motor relays, under ISO9001-2015, CCC, State Grid, and TUV certifications.

Huajin Technology Jiaxing Co., Ltd.
  • 0+

    Established in May 2021

  • 0%

    Annual exports account for about 30%

  • 0㎡

    The company occupies an area of 8,000 square meters.

Huajin Technology Jiaxing Co., Ltd. was established in May 2021 and is located at 707 Yanyu Road, Yucheng Town, Haiyan County, Jiaxing City, Zhejiang Province. It is a high-tech enterprise specializing in the research and development, production, and sales of relays.The registered capital of the company is 10 million yuan, covering an area of 8000 square meters, with more than 120 employees. The annual production capacity of magnetic latching relays is over 10 million, of which exports account for about 30%. The company has obtained ISO9001-2015 quality management system certification, and its relays have passed CCC certification, State Grid certification, TUV certification, etc. It also holds multiple technical patents. Our main products include motor relays, single-phase, two-phase, and three-phase magnetic latching relays, which have a wide variety of types and can meet various customized solutions for customers.

Recommended LINS: Relay for Overvoltage Protector Smart Capacitor Control Relays Relay for Harsh Environment Low Power Consumption Relay Energy Meter Relay AC Charging Station Relay Multi Circuit Relay Control Dual Circuit Relay Control
HAVEN'T FOUND THE PRODUCTS YOU WANT?
CONTACT US